其他說明
E8400超4.5G參考
By Michael
Oct 16, 2010 - 11:41:47 PM

電腦超頻 4.5G hz {9*500= 4.5Ghz ddr2 跑 1000(1:1)}~BIOS 設置

平台介紹 cpu:E84oo( 雙核心 ) 主機板 :ASUS P5Q-E RAM DDR Ⅱ 1066 1G*4 POWER:EN 5150 500 瓦

for win7

AI Overclock tuner: Manual
CPU Ratio Setting: 09.0
FSB Strap to North Bridge: AUTO
FSB Frequency: 500
PCI-E Frequency: 100
DRAM Frequency: 1000
DRAM CLK Skew on Channel A1: AUTO
DRAM CLK Skew on Channel A2: AUTO
DRAM CLK Skew on Channel B1: AUTO
DRAM CLK Skew on Channel B2: AUTO
DRAM Timing Control: Manual
1st Information :
CAS# Latency: 5
DRAM RAS# to CAS# Delay: 5
DRAM RAS# Precharge: 5
DRAM RAS# Activate to Precharge: 15
RAS# to RAS# Delay : A
Row Refresh Cycle Time: A
Write Recovery Time:A
Read to Precharge Time: A
2nd Information :
READ to WRITE Delay (S/D): A
Write to Read Delay (S): A
WRITE to READ Delay (D): A
READ to READ Delay (S): A
READ to READ Delay (D): A
WRITE to WRITE Delay (S): A
WRITE to WRITE Delay (D): A
3rd Information :
WRITE to PRE Delay: A
READ to PRE Delay: A
PRE to PRE Delay: A
ALL PRE to ACT Delay: A
ALL PRE to REF Delay: A
DRAM Static Read Control: A
DRAM Read Training: A
MEM. OC Charger: A
AI Clock Twister: A
AI Transaction Booster: A
CPU Voltage: 1.36875V (CPUZ=1.344)
CPU GTL Voltage Reference (0/2): AUTO

CPU GTL Voltage Reference (1/3): AUTO

CPU PLL Voltage: 1.52

FSB Termination Voltage: 1.36
DRAM Voltage: 2.20
NB Voltage: 1.36

NB GTL Reference: 0.57x

SBridge Voltage: AUTO

PCIE SATA Voltage: AUTO

Load Line Calibration: enabled


CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Clock Skew : 400ps
NB Clock Skew : 100ps
Advance CPU Settings
CPU Ratio Setting: Manual
CPU VID: Default
C1E Suppport: Disabled
Max CPUID Value Limit: Disabled
Intel® Virtualization Tech: Disabled
Vanderpool Technology: Disabled
CPU TM Function: E
Execute Disable Bit: Disabled

express Gate isabied